Published at Thursday, January 11th 2018. by Ophelia Shannon in Drawers Design.
MDF (Medium Density Fibreboard) is something the same again, only the particles are smaller. This allows more detail to be machined into the finished product and quite ornate pieces can be produced which are then painted or veneered.
If you own an Antique Chest of Drawers you will notice a vast difference between these and modern day produced furniture. The Antique Chest of Drawers will be made either of Mahogany, Oak, Walnut, Pine or some other good quality wood. Even if it is not one of the higher quality woods it will at least be made of real wood.
Many people prefer to buy antiques for their own use, in order to get a good standard of manufacture for a reasonable price. Even furniture from the first half of the 20th century, before the use of particle board became widespread, can be of good quality and good value.
It is highly important to figure out a place where this plastic chest of drawers will go in your house and thus taking a measurement for the same would be a great idea. It is highly advisable to put the plastic drawers away from the radiator and fireplaces. It is better to go for the designs that have an adjustable feet, which can probably help in getting the right fit on the floor and the wobbling can be easily taken care off, rather than putting a wedge under the table.
For example, a chest of drawers truly does maximize the amount of available space that will be available after the placement of that furniture piece.
A modern day Chest of Drawers will quite likely be made of something like Chipboard or MDF. Chipboard or particle board (called by different names in different countries), is made up of tiny chips of wood all glued together and pressed by machine into flat boards, usually 12mm or 18mm thick. These wood chips come from unused or unusable sized pieces of wood at the timber mill and also from recycling old wooden furniture. These boards can be veneered and are used in flat pack furniture, where the purchaser buys the furniture and has to assemble it by their self. Even buying ready made furniture from a store, there is a possibility that it has been delivered to the shop as flatpack and has been assembled by the staff.